Need help? Call us: +64 210 277 5969 or sales@tools4trade.nz
0
0 items
$0.00
No products in the cart.
![MULTIFUNCTION TABLE MFT/3 Basic](https://tools4trade.nz/wp-content/uploads/2023/05/500608_500608-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![PERFORATED TOP MFT/3-LP](https://tools4trade.nz/wp-content/uploads/2023/05/495543_495543-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![CROSS BRACE MFT/3-QT](https://tools4trade.nz/wp-content/uploads/2023/05/495502_495502-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![MFT/3-ZK](https://tools4trade.nz/wp-content/uploads/2023/05/495541_495541-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![MFT/3-AR indent](https://tools4trade.nz/wp-content/uploads/2023/05/495542_495542-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![LEVER CLAMP MFT-HZ80](https://tools4trade.nz/wp-content/uploads/2023/05/577132_577132_1-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![FIXED CLAMPS MFT-SP ( 1 pair)](https://tools4trade.nz/wp-content/uploads/2023/05/488030_488030-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![CONNECTOR VS indent](https://tools4trade.nz/wp-content/uploads/2023/05/484455_484455-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![MW1000 BASIC workshop with pull out drawer](https://tools4trade.nz/wp-content/uploads/2023/05/203454_203454-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![DRAWER SYS-AZ-MW1000](https://tools4trade.nz/wp-content/uploads/2023/05/203456_203456-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![BASE TSB/1-MW1000](https://tools4trade.nz/wp-content/uploads/2023/05/203457_203457-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![TABLE STM1800](https://tools4trade.nz/wp-content/uploads/2023/05/205183_stm1800-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![** KIT **MOBILE WORKSHOP MW1000 SET
** build from components](https://tools4trade.nz/wp-content/uploads/2023/05/203802_203802-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![MFT/3](https://tools4trade.nz/wp-content/uploads/2023/05/495315_495315-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![FEATHER KEY WCR1000 PF 2x](https://tools4trade.nz/wp-content/uploads/2023/05/497476_497476-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![TOOL HOOK WCR1000 WH](https://tools4trade.nz/wp-content/uploads/2023/05/497474_497474-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![HOLDER FOR GUN WCR1000 LPH](https://tools4trade.nz/wp-content/uploads/2023/05/498361_498361-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![WORKCENTRE WCR1000 T-LOC](https://tools4trade.nz/wp-content/uploads/2023/05/577253_wcr1000-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![DIE](https://tools4trade.nz/wp-content/uploads/2023/05/30109169009_30109169009-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![PUNCH DIE SET indent](https://tools4trade.nz/wp-content/uploads/2023/05/63602048013_63602048013-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![PUNCH 1.3mm for max 400MPa steel](https://tools4trade.nz/wp-content/uploads/2023/05/63602050000_63602050000-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![PUNCH 1.3mm 5X max 400MPa steel](https://tools4trade.nz/wp-content/uploads/2023/05/63602050030_63602050000-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![DIE BLK1.6E](https://tools4trade.nz/wp-content/uploads/2023/05/30109141003_30109141003-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Tube Cutter Telescopic 3-32mm](https://tools4trade.nz/wp-content/uploads/2023/05/SEAA0332_SEAA0332-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 14″](https://tools4trade.nz/wp-content/uploads/2023/05/SBCB1407_sbbb1407-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 14″](https://tools4trade.nz/wp-content/uploads/2023/05/SBBB1407_sbbb1407-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 18″](https://tools4trade.nz/wp-content/uploads/2023/05/SBCB1808_sbbb1808-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 18″](https://tools4trade.nz/wp-content/uploads/2023/05/SBBB1808_sbbb1808-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 24″](https://tools4trade.nz/wp-content/uploads/2023/05/SBCB2410_sbbb2410-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 24″](https://tools4trade.nz/wp-content/uploads/2023/05/SBBB2410_sbbb2410-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 30″ *IND*](https://tools4trade.nz/wp-content/uploads/2023/05/SBCB3013_sbbb3013-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 30″ *IND*](https://tools4trade.nz/wp-content/uploads/2023/05/SBBB3013_sbbb3013-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 36″](https://tools4trade.nz/wp-content/uploads/2023/05/SBCB3616_sbbb3616-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 36″](https://tools4trade.nz/wp-content/uploads/2023/05/SBBB3616_sbbb3616-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 42″](https://tools4trade.nz/wp-content/uploads/2023/05/SBCB4218_sbbb3616-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Bolt Cutter 42″](https://tools4trade.nz/wp-content/uploads/2023/05/SBBB4218_sbbb3616-scaled-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Replacement Bolt Cutter Jaw 24″](https://tools4trade.nz/wp-content/uploads/2023/05/SLAA2410_slaa2410-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Replacement Bolt Cutter Jaw 30″](https://tools4trade.nz/wp-content/uploads/2023/05/SLAA3013_slaa3013-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Replacement Bolt Cutter Jaw 42″](https://tools4trade.nz/wp-content/uploads/2023/05/SLAA4219_slaa4219-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Snip Aviation Left Cut RED](https://tools4trade.nz/wp-content/uploads/2023/05/SBAC0125_sbac0125-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Snip Aviation Right Cut GREEN](https://tools4trade.nz/wp-content/uploads/2023/05/SBAC0225_sbac0225-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Snip Aviation Straight Cut YELLOW](https://tools4trade.nz/wp-content/uploads/2023/05/SBAC0325_sbac0325-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Hacksaw HD 12″](https://tools4trade.nz/wp-content/uploads/2023/05/SAAA3013_SAAA3013-500x500.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set BSW 1-1/2″](https://tools4trade.nz/wp-content/uploads/2023/04/BSWHS1-12-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
BSW 3 Piece Set HSS
Measure Standard:
BSW Course
Overall Length:
170
Style:
Set - Taper/Inter/Bot
TPI (Teeth per inch):
6
Package Size:
Each
Diameter (inches):
1-1/2"
Drill Size (mm):
33.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNF 8Gx36](https://tools4trade.nz/wp-content/uploads/2023/04/UNFHS8G-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNF Set 3 Carbon
Measure Standard:
UNF Fine
Overall Length:
53
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
36
Package Size:
Each
Diameter (inches):
8G
Drill Size (mm):
3.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 9/16×12](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS916-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
95
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
12
Package Size:
Each
Diameter (inches):
9/16"
Drill Size (mm):
12.2
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 8Gx32](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS8G-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
53
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
32
Package Size:
Each
Diameter (inches):
8G
Drill Size (mm):
3.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 7/8 x 9](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS78-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
118
Style:
Set Taper/Inter/Bot
Diameter (inches):
7/8"
Drill Size (mm):
19.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 7/16×14](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS716-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
85
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
14
Package Size:
Each
Diameter (inches):
7/16"
Drill Size (mm):
9.4
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 6Gx32](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS6G-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
50
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
32
Package Size:
Each
Diameter (inches):
6G
Drill Size (mm):
2.8
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 5Gx40](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS5G-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
48
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
40
Package Size:
Each
Diameter (inches):
5G
Drill Size (mm):
2.6
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 5/8×11](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS58-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
102
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
11
Package Size:
Each
Diameter (inches):
5/8"
Drill Size (mm):
13.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 5/16×18](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS516-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
72
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
18
Package Size:
Each
Diameter (inches):
5/16"
Drill Size (mm):
6.6
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 3/8×16](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS38-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
80
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
16
Package Size:
Each
Diameter (inches):
3/8"
Drill Size (mm):
8
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 3/4 x 10](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS34-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
112
Style:
Set Taper/Inter/Bot
Diameter (inches):
3/4"
Drill Size (mm):
16.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 3/16×24](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS316-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
58
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
24
Package Size:
Each
Diameter (inches):
3/16"
Drill Size (mm):
3.7
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 1/4×20](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS14-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
66
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
20
Package Size:
Each
Diameter (inches):
1/4"
Drill Size (mm):
5.1
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 12Gx24](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS12G-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
62
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
24
Package Size:
Each
Diameter (inches):
12G
Drill Size (mm):
4.5
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 1/2×13](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS12-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
89
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
13
Package Size:
Each
Diameter (inches):
1/2"
Drill Size (mm):
10.8
Add to Wishlist
Add to Wishlist
![Alpha HSS Tap Set UNC 10Gx24](https://tools4trade.nz/wp-content/uploads/2023/04/UNCHS10G-500x500.jpg)
Add to Wishlist
Add to Wishlist
Specs
Category:
UNC 3 Piece Set HSS
Measure Standard:
UNC
Overall Length:
58
Style:
Set Taper/Inter/Bot
TPI (Teeth per inch):
24
Package Size:
Each
Diameter (inches):
10G
Drill Size (mm):
3.9
Add to Wishlist
Add to Wishlist
Filter by price
Brands
- ALMAX
- Alpha
- APOLLO HVLP
- ASTUROMEC®
- Austsaw
- Bristol
- BRUSH MATE®
- Dart
- Devil
- Euroboor
- Fein
- Festool
- FULL CIRCLE
- Gundlach
- Hindin
- HYDE®
- Imperial-blades
- INTEX
- Itw
- LIFT OFF®
- Marquip
- Maxabrase
- Maxbor
- MCC
- MPS
- Orbis
- OVABOARD™
- Paasch
- Paint Spray Guns & Equipment
- Soudal Ltd
- SPARMAX
- STAR®
- Sterling
- TOP FINISH
- Toptul
- TRIMACO
- TUFF
- WALCOM
- Weld
- Wellmade
- Westing
- WOOSTER
- ZIPWALL®
![](https://tools4trade.nz/wp-content/uploads/2023/05/t-good-white-e1683483205444.png)
AUTOMOTIVE | INDUTRIAL | COMMERCIAL
Tools 4 Trade is a 100% New Zealand owned and operated online tool retailer. We are proudly based in Auckland, and have been providing online tool solutions for Kiwis
Customer Service
Copyright 2024 © Tools 4 Trade | All right reserved
![](https://tools4trade.nz/wp-content/uploads/2023/04/credit-cards.png)